Questions & Answers for: saab acceleration problems

Question about 1996 900

2 Answers

saab 900s 1996 convertable hi please could you help me solve my problem.when i accelerate my saab holds back slightly then seems to clear and will accelerate normally but as soon as you change up a ...

Ad

Question about 1991 9000

2 Answers

...SAAB 9000. With me it only happened under hard acceleration, and it was caused by the Waste Gate Controller being sticky and over-boosting the engine to the point where the overpressure switch came ...

Ad

saab 20t 95 is slow to accelerate sometimes going down the motorway when accelerating it started to misfire but when accelerate it stops MISFIRE COULD BE STOPPED UP FUEL FILTER.SLOW ACCELERATE PROBLEM

acceleration problem with my saab 1.9tdi 150bhp i accelerate the car but it drives very slow and now the malfunction light has come on i need a lil help here thanks could be a problem with the exhaust

...but oh well... now the acceleration has gone out again and they are telling me i have replace the whole turbo system to the tune of $2000 . my saab is slowly and steadily starting to let me

Question about 1992 900

0 Answer

My 1992 Saab 900 Turbo has hard starting in wet weather. Once it's started, it stalls when the accelerator is depressed. The problem of stalling is greater when the gas pedal is pressed quickly. I've ...

...saab 9-3 aero coupe 2001 has misfiring problem when going to accelerate the speed of the car. also turbo doesn't give the power it should.help misfiring problems when the car accelerates , turbo ...

Question about 1997 900

1 Answer

acceleration on low RPM Could someone help me to solve the problem please! saab 900 t. When I press the gas pedal to the end in in second gear on 1000rpm, saab needs from 7 to 10 seconds to accelerate

Saab 9-3 theres no responds when i press down the accelerator pedal soon after the fuel ran dry while driving. Please assist. the fuel tank ran out of petrol while driving such that it developed this ...

I got a 2000 saab 9-5 3.0 it run good but when u accelerate dont want to go. Sounds like a valve or a rod bearing. It's probably really high mileage. run the fault codes there are several ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...