stopwatch does not reset to zero. It is currently at 1 hr and 55 minutes as it's zero. I can reset the (red) second hand to zero. How do I reset the stopwatch hour hand and minute hand to zero? Thanks
...hand on my chronograph. I do not see anything in the manual that explains how to do this. Any assistance you can offer would be much appreciated. I have CL1180 and had the same problem, pulling the ...
...hour hand, permanently synchronized with the normal 12 hour hand. A. SETTING THE TIME 1. Pull the crown out to position ?3? (See diagram). If the crown has a ?screw-down? lock, then unscrew the crown ...
...hour hand, permanently synchronized with the normal 12 hour hand. A. SETTING THE TIME 1. Pull the crown out to position ?3? (See diagram). If the crown has a ?screw-down? lock, then unscrew the crown ...
...hand to zero, the hour and the minute hand are not engaged in this function, so, there is no fault with the watch movement. Do as follows: 1) pull out crown and set the hour and minute hands at 6 ...
Question about 100 Meter Alarm Chronograph PF3277
...hour and minute hands at 6 o'clock (they must be lined perfectly in opposite directions) 2) push the crown in half way back (not completely) 3) push and hold the button at 2 o'clock (set the big ...
Question about 100 Meter Alarm Chronograph PF3277
...hour hand for the chronograph. Don't confuse these with the min and hr hands that tell the time. Pull the crown(not bezel) out to the first position. Now push the upper button and see which hand ...
...hour and minute hand your watch is a chronograph or stop watch. the large second hand that is pointed at 12, it is the second hand of the stop watch, it moves when you press te upper right button and ...
Question about HA00593 Power Supply
...hour and minute hands. 3. When the crown is pushed back to the normal position, small second hand begins to run. C) SETTING THE DATE 1. Pull the crown out to the 1st position. 2. Turn the crown ...
hand has stopped in a position well past the 30 minute mark on it's dial and is pointing just above the 18hour mark on the 24 hour dial. I'd welcome suggestions on how to fix this. Please call citizen
Usually answered in minutes!
756 Questions
260 Questions
271 Questions
253 Questions
254 Questions