Questions & Answers for: reset clock chimes

clock, is there a reset button,how do we get it working. it is 11yrs old? and been in storage for 6mnths Press the red button at the back and go through all the hourly chimes until you get to the next

...clock are not w/the actual hour set.How can I reset the chimes? Daylight Savings time has messed me up. I stopped my clock long enough to move the hour hand back.The chime still chimes w/the old ...

...reset wesrminister wall chime clock We stopped the clock to pack it to move. How do we reset it so it will chime If this is a mechanical clock, make sure the chime lever is set on. If quartz there is ...

...reset? Try pulling the batteries out, set the clock to 5:45 then put the batteries back in. Set the time to 6:00 and count how many times it strikes. If it strikes 6 then your good. If it strikes a ...

...websites that can more an likely give you more information..There's also clock repair shops online who can walk you through the repair or reset.Hope this helped. ...

...reset a chime clock I just set up my Howard Miller grandfather clock after a move. The chimes are off. How do I reset them to ring properly? The next time it chimes multiple times turn the hour hand ...

...reset the chime cable or belt...but anytime you set your clock when you get to hour let it chime completely before continuing on...Try also going around with hour hand onetime and let it chime, if it ...

...clock should be reset only by turning the hands forward and pausing at each quarter, half and hour to allow the chiming of each to complete. Most folk simply stop their clocks and wait for time to ...

...on its own even though the chimes are turned off. A worn chime cog wheel will not reset or advance the count. Unless you're good at making gears, you'll need a decent clock repair guy in your

...Reset the time using the minute hand to the correct hour and the chime should adjust along with the clock hands as well. ADJUSTING THE QUARTER CHIME On most mantel clocks, you can simple remove the ...