Questions & Answers for: replace starter 2007 equinox

...replace battery, did that and rest of check ok ie starter, alternator etc. any problems with shorts in the 2005 that may be draining the battery? This sounds like the Technical Service Bulletin for ...

Ad

Question about 1998 S-10 Pickup

1 Answer

...starter to turn over? It's when the security light starts flashing that the infamous "chip" in the key becomes a nightmare to many. Gradually the car begins not cranking anymore or if it cranks it ...

Ad

...starter. It's when the security light starts flashing that the infamous "chip" in the key becomes a nightmare to many. Gradually the car begins not cranking anymore or if it cranks it would start and ...

Question about 2005 Equinox

1 Answer

...starter clicking and when i try all dash lights shut off for a couple seconds It's when the security light starts flashing that the infamous "chip" in the key becomes a nightmare to many. Gradually ...

Question about 2007 Equinox LS New Cars

1 Answer

...back of the head, one on each side corner. The CKP is under the oil filter housing, above the starter. To replace the CKP, you're supposed to remove the intake manifold and starter.

Question about 2007 Equinox LS New Cars

1 Answer

...2007 and it has a dead battery and the doors are lock what do i do to get the hood open to charge the battery to unlock my car You always have a key cylinder on the drivers door to get into the ...

...2007 chevy equinox that won't start. Took the battery and starter in and they both tested fine, the battery was a little weak but put it on the charger overnight. when i try to start it i get Starter ...

...2007 Equinox worked just fine for the first 2 weeks that I owned itJanuary 2015. And then one morning, I tried to start it and the only thing that happened was the engine light would come on when I ...

do you need to drop the starter to replace the crankshaft position sensor? My info doesn't say anything about removing the starter. Do what makes it easiest for you.

...starter bad. (no it's new) and is last to replace. any of the wires to all the above bad, (we call this the captain obvious answer (wires/rusty connectors) endless. or scan the PCM obd2 port while ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...