Questions & Answers for: replace proscan tv fuse

proscan PS32610 Tv keeps blowing fuses when i replace them then plug it back in Tv keeps blowing fuses it is due to short ckt in your tv in 1 power supply. 2 horl output section it is mainly due to 1 ...

...PROSCAN TV BIG SCREEN JUST SHUT OFF. how do i repair this It won't turn back on now? Any clicking, indicator lights, etc?....accordianman replace the small 5G5A125V fuse in the back where the power ...

...proscan TV Model PS27123. We've had a lot of power outages in our area due to bad storms and the other TV sets came back on except thi one after we recovered power. Good day. I believe the power ...

tv to "replace it" for me but he never showed back up! I need to buy a fuse for my PS27113 but need to know what size. Help please! :) Where the fuse are put it on the board get the capacity always be

...Proscan 60680, chasis number PTK171ABC C 2404 K1D, that I purchased in 1992. In the last 3 years, I have had to replace the HV splitter twice. Now the main fuse (where electical plug plugs into tv) ...

proscan lcd tv model 26lb30h blows fuse on power board Took apart and replaced blown fuse and it blows it again If the fuse blows again after replacing it, there's a shorted diode, bridge rectifier, ...

tv wont turn on i have a 42" Proscan standby light comes on but the tv wont turn on I see so many here with no sound/no picture issues: ISSUES: 1. IF sound main fuse/s are good. 2. If no power or

...tv wont turn on no red light check blown fuse at the power supply board.but before you replaced it with new one a component testing must be applied. check for a bad parts at the power supply

...proscan tv model plcd5092a won't turn on the green light comes on for about 5 seconds then goes red probably a bad capacitor. if it cant hold the charge it will not power up the screen. it could have ...

...proscan 42la45h model lcd the tv has power but wont turn on. Any suggestions check fuses. if it turns on via remote control replace batteries. First remove from mains / power for a good ten minutes ...