Questions & Answers for: replace headlamp bulb

Question about 1993 Mustang

1 Answer

...replace all 6 headlights and assemblies on my 1993 ford mustang GT. sorry, i only have 94 whcih is probably different. Hope it helps at least some. Section 17-01: Lighting, Exterior 1994 Mustang. ...

Ad

Bulb ?Headlamp Removal WARNING: The halogen bulb contains gas under pressure. The bulb may shatter if the glass envelope is scratched or if the bulb is dropped. Handle the bulb only by its base. Grasp

Ad

...HEADLAMP BULB CONTAINS GAS UNDER PRESSURE. THE HALOGEN HEADLAMP BULB MAY SHATTER IF THE GLASS ENVELOPE IS SCRATCHED OR THE HALOGEN HEADLAMP BULB IS DROPPED. HANDLE HALOGEN HEADLAMP BULB CAREFULLY. ...

Question about 2004 TrailBlazer

1 Answer

...headlamp.INSTALLATION PROCEDURE IMPORTANT : Replace a high beam bulb with another high beam bulb. The high beam bulb has a black socket. Replace a low beam bulb with another low beam bulb. The low ...

...replace headlight bulb on 2002 chevy trailblazer Headlamp Removal & Installation Bulb Replacement To Remove: CAUTION Halogen bulbs contain pressurized gas. Mishandling a bulb may result in the ...

Question about 2008 Sierra 2500HD 2WD

1 Answer

...Headlamp Bulb (Hi) Warning: Refer to Haiogen Bulb Warning . Tip: Rotate the bulb socket a quarter turn counterclockwise and remove the bulb from the headlamp. Headlamp Bulb (Lo) Tip: Rotate the bulb ...

Question about 1999 Grand Marquis

1 Answer

...HEADLAMP BULB CONTAINS GAS UNDER PRESSURE. THE HEADLAMP BULB MAY SHATTER IF THE GLASS ENVELOPE IS SCRATCHED OR THE HEADLAMP BULB AND RETAINER (13N021) ARE DROPPED. HANDLE BULB CAREFULLY. GRASP ...

Question about 2006 Rainier

1 Answer

...bulb from the headlamp assembly by rotating the bulb and socket counterclockwise. To Install: Connect the headlamp connector. Install the bulb into the headlamp assembly by rotating the bulb and ...

Question about 2006 VRSC A V-Rod

1 Answer

replace headlamp bulbs. 1. To replace the low beam or high beam headlamp bulb, reach behind the headlamp bucket and grasp the appropriate headlamp bulb socket connector. 2. Squeeze the release latches

...headlamp assembly to replace the bulb ! Remove the headlamp assembly. Refer to Headlamp Replacement. 1 Headlamp Bulb Accessory Covers (Qty: 2) 2 Headlamp Bulb Assembly (High Beam) Caution: Refer to ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...