Questions & Answers for: Oldsmobile Alero replace crankshaft position sensor 1999

Question about 1999 Alero

2 Answers

crankshaft position sensor, ignition module, fuel filter, plugs and boots. Also has new battery and alternator. check your throttle position sensor When you replaced your CKP sensor, did you perform a

Ad

crankshaft position sensor keep my car from starting if it's bad, and if so, how do I replace it? yes it can stop vehicle from starting,but i would call a mobile mechanic to check it out for you,start

Ad

Question about 1999 Alero

2 Answers

crankshaft pos. sensor is just above the oil filter. take out starter and oil filter and make sure buy a new oilfilter or just make sure that you dont destroy the one on the car . remove plug and then

Question about 1999 Alero

1 Answer

...sensor (or crankshaft position sensor) to fail. They are replaceable. If the onboard computer does not get the correct input it cannot control the engine timing correctly and automatically shuts

Crankshaft sensor 1999 Olds Alero 3400 motor What is the location of the crankshaft sensor? Welcome to fixya. If you need anything else go to www.collisionrepairadvice.com here is the location. On the

sensor located on my 2000 Where is the crank shaft sensor located on my 2000 alero? ABOVE THE OIL FILTER ON THE 2.4 ENGINE AND THE 3.1 AND 3.4 ENGINE CRANKSHAFT SENSOR LOCATED BEHIND CRANKSHAFT PULLEY

...the cam sensor is located According to Haynes Manual, the cam position sensor is located in the timing chain cover which is above the crankshaft on the left side of the timing cover. Good luck ...

REPLACE CRANKSHAFT SENSOR IT HAS TO HAS TO BE RELEARNED USING TECH 2 SCANNER.FOR THE IGNITION KEY REPLACEMENT.TURN IGNITION SWITCH TO THE ON POSITION FOR 10 MINUTES WITH ENGINE OFF.WHEN SECURITY LIGHT

Question about 1999 Alero

1 Answer

...all around the crank pulley, and see no wires or anything that looks like the unit. THE 2.4L ENGINE CRANKSHAFT POSITION SENSOR LOCATED JUST ABOVE THE OIL FILTER.REMOVE OIL FILTER YOU WILL SEE

...when the crankshaft position sensor went bad. The car would chug and mis-fire. If the engine is running fine, I would think maybe the odometer cluster may be faulty of have a poor connection to

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...