Questions & Answers for: replace brake pedal switch 2007

...do not work! I have checked the bulbs and the fuse and they are all good. What should i try next? it is the brake switch on the pedal. the contact inside the switch is bad There is a Recall # ...

...same issue. The brake lights on the tail won't work. The rear cab brake light does work. I've checked the fuses and replace the brake light switch. They still don't work. It's a 2007 Colorado 4

...brake light failure. You might just get yours fixed for free if you take it up with your dealer. (2) According to the OWNERS MANUAL the stock RADIO is integral to the chime alarms AND the diagnostics ...

...brake pedal. If you follow the metal shaft leading up from the pedal you will see a switch with a plunger. Push on the pedal with your hand while you can see the switch and see if the plunger moves ...

...on pedal arm close to dash Try wiggling the blinker switch. They tend to cause this issue since the brake lights are wired thru this unit. Most likely you will need to replace the multifunction ...

...brake pedal and you will see your brake switch up along your brake pedal arm. It will either be between the brake arm and the firewall so when you brake it pushes the switch in. Or it will be between ...

where is the brake light switch on the chevy colorado 2004 is ti round or is it square can you sent a diagram of the location of the part brake switch is at the brake pedal

...BRAKE PEDAL POSITION SWITCH WILL SET OFF CRUISE CONTROL WARNING LIGHT.IF BRAKE SWITCH OKAY.THE DEALERSHIP HAS TO DIAGNOSIS AND FIX PROBLEM. Actually that's for the Tire Pressure Monitoring system. ...

the brake light fuse keeps blowing on my 2004 chevy colorado as soon as i touch the brake pedal brake light switch may be bad

...the bulbs. The brake light switch , usually mounted to the pedal bracket, is probably bad . If equipped with cruise and driving down the road, see if hitting the brakes disengages the cruise speed