...Sharp site doesn't recognize the model. You need to remove the hood (the grille cover above the microwave door and above the control panel) by lifting up on the bottom of the hood (the plastic should ...
Sharp R1514 microwave oven; pushed handle in to open and it is stuck in that position. How can I repair this? The mechanism has failed. simply replacing this handle(push) mech will fix this issue. You
...Microwave R-316F Display Light Time display light is out. How do I access it, to replace it? first remove the outer cover by removing the screws at the back.then u should see a screw behind the ...
Sharp Microwave Model R-510B Light burned out - how do I replace? Generic answer: You probably have to remove the case. DO NOT TOUCH THE SILVER CAN - LETHAL. There are probably 8 phillips or torx head
...diagram for sharp carousel microwave model r-1491 I found one for mind on the inside of the outside cover caseing. just need to unmount from wall and remove the six screws of the back to remove
sharp microwave just quite, while there is active power supply the microwave is getting no power at all, could it be a fuse if so can I replace it myself? remove cover and check small fuse, if fuse is
Question about R-930AK Convection/Microwave Oven
remove our SHARP R-1420B microwave... We're trying to remove our sharp R-1420B microwave oven off the wall. We're having absolutely no luck. How do we get this off the wall? I just removed our Sharp R
bulb on a sharp R 450 D microwave Remove mains power, remove the case from the microwave and the lamp is near the door catches above the transformer. Remove the lamp and fit a new one. Hope that helps
Question about R-1870 Convection/Microwave Oven
...remove my Sharp R 1870 from the wall What holds the "over the range" microwave to the wall and what does it take to remove it? PUSH UR MICROWAVE VERTICAL. IT WILL DISMOUNT ON ITS OWN.. THEN ...
Question about R-1870 Convection/Microwave Oven
...loose.i have seen this on several Sharp microwaves. Simply unplug your microwave, remove two screws holding the face plate, unplug the white plug carefully and then plug it back in. Hope this
Usually answered in minutes!
3,405 Questions
567 Questions
285 Questions
308 Questions
275 Questions