Questions & Answers for: remove lower ball joint

Question about 2002 TrailBlazer

1 Answer

...remove lower ball joints from 2002 chev trailblazer step by step Remove the steering knuckle with wheel hub and bearing attached. Remove the lower ball joint flange with a chisel. Install J9519-E and ...

Ad

Question about 1999 Taurus

2 Answers

remove the lower joint snap ring and dust boot. Utilizing a ball joint press (should be able to rent from local parts store) press the joint out of the knuckle. Re-installation is naturally reverse of

Ad

Question about 2004 Tacoma

1 Answer

Remove in this order: wheel, loosen the 4 lower ball joint set bolts, cotter pin and nut from tie rod, tie rod from ball joint bracket, ball joint from lower control arm, 4 lower ball joint set bolts,

...remove the lower ball joint from the lower control arm. To install: Install or connect the following: Lower ball joint to the lower control arm, using tools J 9519-E, J 41435 and J 45105-2 Remove the ...

...lower arm assembly. Remove dust cover. 2. Remove stay. Remove shock absorber lower mounting bolt. Loosen lateral lower arm ball joint and knuckle nut. Using steering linkage puller, separate ball ...

...Remove and discard the lower ball joint cotter pin. Remove the ball joint nut. Loosen, but do NOT remove, the stabilizer shaft bushing assembly bolts. Separate the ball joint from the strut/knuckle ...

Question about 2001 Quest

1 Answer

...of knuckle to help get it to drop. or rent a pickle fork to drive between the bal joint and knuckle. Remove the suspension lower arm ball joint to suspension lower arm nuts and remove the ball

Question about 2001 Quest

1 Answer

Remove the lower ball joint cotter pin and retaining nut. Pry the steering knuckle up and away from the lower ball joint. Unscrew the grease fitting from the bottom of the lower control arm. Press the

Question about 2003 Sunfire

1 Answer

...Remove the lower control arm front (1) and rear (4) mounting bolts.Remove the lower control arm (1) from the vehicle and place in a vice.Drill out the 3 rivets (3) retaining the ball joint to the ...

Question about 1998 Caravan

1 Answer

...remove the lower control arm by following steps 1-3 above. then remove the bolt from the front bushing. Remove the stamped steel skid pan from the sub frame. Remove the rear lower control arm bushing ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...