...UP. TV WORKED FINE PRIOR BUT IT WAS REGULAR CABLE WITH NO CONVERTER BOX AT THAT TIME. IS THERE ANY HELP FOR IT. i ALREADY HAD THE FIOS REMOTE REPLACED BUT NO CHANGE. Your Fios box seems to be ...
remote) will turn volume up and when it is pressed on the set itself there is a clicking noise but volume will go up.....and decrease all the way back down. Comcast replaced cable box as they believed
Question about Digital-to-Analog Converter for Analog TVs
...remote works to turn on and off tv and coverter box but can't get menu up to do anything. Really frustrating! Sounds like the converter didn't make it. The symptoms you describe sound like the ...
...car is hooked up for voltage sense instead of running a tachometer wire. If you have run a tach wire you'll need to program the tach signal and make sure your remote start options are set for
Question about Harmony 520 LCD Remote Control
...box and receiver but not television itself. we have had the system for almost 3 months but this has started in the past week. does it need to be reprogrammed or something? I would hook the harmony ...
...remote wire will start to rapidly heat up. After a couple seconds the wire will start to melt. The music will still play though. sounds like the remote wire is shorted somewhere in it and needs to be ...
...start from there, you can make your remote work by jumping to the interior fuse box. Hook the negative jumper to a good chassis ground point, turn the key on, hook a wire to the positive jumper and ...
Question about 2001 S-Class
...remote,hooked to dtv converter box,what menu settings do I use(flat screen,fat back) when all connected both colour cables and antenna in and out of the desktop box and TV correctlyand both turned ...
Question about 2001 S-Class
start automatic search yes no. can't get further using remote. 2 green lights left of box and 1red light. Do you have a digital to analog signal converter hooked up to the TV? If you use an antenna to
...start up Use your remote. Press menu and look up initial set up or reset to factory settings. * Note that as of Jan 2018 most cable companies do not provide analog outputs to TV sets. If your still ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions
