Questions & Answers for: release stuck hood latch

release is stuck. Ok, open the door, stand next to the door, pull the hood release while slapping your hand on the hood or have someone else lift the front edge while you pull on the latch..... should

...release has no tension on it. Hood will not latch. Appears that the cable may be stuck. The latch is stuck in the open position. I always found white lithium grease worked best on those latches but ...

...release even when pulled all the way with vigor 3. Rear window wiper stuck in upright position and won't respond to off-on switch Thanks The no heat problem could be a stuck open thermostat, plugged ...

stuck or broken, any ideas? have someone push down on hood as you try to release hood latch if thie works for you, you can spray hood latching system and cable. work hood release from inside few times

...stuck, broken latch, cable cord sticking out I just used a flat head screwdriver and went in through the grill... one opening from top. Vertically placed screwdriver just behind where latch cable ...

...stuck and before i would manually turn the release inside the vehicle to make it close, but today when I opened the hood it wont close the relese inside the vehicle seems stuck, how do i get it to ...

...1999 Chevy Prizm is stuck closed. Pulling on the hood release latch inside the car does nothing. How can I manually open the hood? try pushing down on hood while somebody elss pull latch mau be ...

stuck freestar I have a 2005 Ford Freestar, and I can't open the hood. The latch inside the car doesn't seem to release anything. How can I get the hood open? check that the cable is still attached to

...release. The latch is probably stuck. While you pull the interior hood release have an assistant push down and pull up repeatably/vigorously until hood releases from stuck position. Lube latch and ...

...stuck and will not release from the latch, there could be several possible causes. Here are a few things you can try to troubleshoot the issue: Check the latch: Make sure the latch is not damaged or ...