...pt cruiser The front wheel bearing are located in the wheel hubs. You will have to take the hubs to a shop to have them pressed out and the new ones pressed back in. I would not recommend doing this ...
How do I remove the bearings on a 2003 PT cruiser? Front wheel bearing has to be press out and press in with a press.
replace front wheel hub and bearings on 2005 pt cruiser are you giving a command or asking a question?
what size is a replacement wheel bearing for passenger front pt cruiser 2003 Wheel Bearing I.D. : 1.6535" Wheel Bearing O.D. : 2.992" Wheel Bearing Width : 1.5354" Wheel Bearing Type : Double Row Tap
does the front wheel bearing on a 06 pt cruiser need to be pressed in? YES IT DOES
...pt cruiser left front wheel shakes when hit brakes. i have brand new tires on it, they are balanced. could it be wheel bearings usually it's a warped rotor. Take it to a brake shop to be resurfaced. ...
the left front seems to be shaking when i drive,any ideas? WHEEL SHIMMY CAN BE CAUSED BY WORN TIE ROD ENDS,BAD WHEEL BEARINGS,WORN OUT BALL JOINTS,WHEEL OUT OF BALANCE OR FRONT END NEEDS ALIGNMENT.
do you need a strut compression tool to change a front wheel bearing on a 02 pt cruiser You shouldn't need the spring tool as long as you only remove the two lower bolts on the strut.
Question about 2008 Pt Cruiser
PT Cruiser which I bought used in 2010. The last couple of years I have noticed a front-end shimmying, particularly when driving about 65 mph on the highway. At first I thought it was from wind but it
Question about 2003 PT Cruiser
I have a 2003 PT Cruiser Touring Edition that makes a loud humming noise while driving but stops when you turn to the right. What could be causing this? Right hand front wheel bearing is worn!
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions