Questions & Answers for: pt cruiser crank sensor

...pt cruiser? Where is the crank sensor located on 2005 chrysler pt cruiser? the crank sensor is located on back right side of engine by were the trans. bolts up.is the no start when could or

Ad

Question about 2003 PT Cruiser

2 Answers

pt cruiser sensors I changed the cam, crank, ingniton coil and spark plugs and the car still wont turn over. Someone told me there is another sensor that chryslers have that might need changing, Every

Ad

Question about 2003 PT Cruiser

1 Answer

...pt cruiser won't turn over. My 2003 pt cruiser won't start. I had a p0344 i think it was, cam sensor circuit intermittant code. It was idling funny in park. I replaced the sensor and it ran great for ...

...PT Cruiser no turbo. Engine died at hwy speed crank/cam sensor faults will not start o1 cruiser spit and sputter go down rd put cam sensor and crank shaft sensor on wouldnt run at alll with new crank ...

...pt cruiser need to find where the crank sensor is located 4cyl It is located next to crankshaft. Just follow spark plug wires to coil pack and module. Then follow from there and they lead directly to ...

Question about 2004 PT Cruiser

1 Answer

...pt cruiser car died while driving. threw code 320. replaced crank sensor,cam sensor, and coil pack. it still won't start.any suggestions? Check for spark and fuel. Is it a Chrysler 2001 PT Cruiser or ...

...PT Cruiser no spark at coil -had code P0340 changed cam sensor and no more code but still no spark what else can it be they can run with out a cam sensor but they will not run with out crank signal i ...

Question about 2002 PT Cruiser

1 Answer

pt cruiser went dead and now it crank but wont start check your crank position sensor. it might be bad. these also have a problem with the cam position sensors.

...pt cruiser was diving down the road and just shut off will not start If it turns over (cranks) but does not start, it is almost surly a bad crank sensor. Check to see if your tachometer moves when ...

...pt cruiser has code 1391. i changed cam sensor crank sensor wires plugs and coil still getting 1391 code and from 0 mph to 20 mph car skips and revs up any ideas? pt cruiser has code 1391. i have ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...