...display only on projector) hope you have other setting like LCD + TV (display on both), Apply, Yes (if you want to keep this setting), OK. Your Canon LV-S3 Multimedia Projector's Native resolution is ...
Question about PD525 Multimedia Projector
...good cable. But its ok if I use another projector such as Infocus. And its oke too if I use another laptop. Please advice and help. you can extend the display to the projector through desktop ...
...get there by clicking on the Apple Menu in the top left corner) -> Displays -> Detect displays After you click "Detect Displays" your G3 should automatically send the display image to your
Question about ScreenPlay 4805 Multimedia Projector
projector system. First, on your laptop, open the Display Properties dialog box by using the Display icon in Control Panel, and click the Settings tab. Then, in Screen resolution area, move the slider
display, your projector cannot sync at this resolution. Look for an option to output a second display )instead of cloning) within your display settings. If your projector is plugged into your VGA port
...display on projector sir, my problem is that i have properly connected laptop with projector but nothing is displayed on projector.plz help me now my problem is solved. trying to use a projector with ...
Question about LP640 Projector Multimedia Projector
projector and will not display laptop image. You have to tell the computer you hooked up an additional external monitor. Lower left on the keyboard you will see a "FN" key. Across the top, your F keys
...display and projector, and so on). Highlight the desired icon to switch the display to that option So the solution is just plug the VGA cable from the projector into the N5010 laptop's VGA port and ...
we connnect optoma projector with laptop, there is no display in laptop, how can we set display in both side, projector and laptop Probably FN and F5 key or whichever key controls your display routing
...have changed that primary display is projector with single display..Right click on desktop properties then on the display devices tab, set operating mode to dual display, so it will be two
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions