Questions & Answers for: singer walking foot

...Singer 7430. I am trying to quilt and need to attach a walking foot. How do I attach it on this machine? You go to the back edge of the presser foot (where it would be) there is a little button and a ...

singer walking foot on it without a needle.  It should be pretty easy to tell if things line up right or not.  It probably won't, Viking is pretty darned picky. I just can''t get

...Singer Futura CE 200 I have the walking foot on my machine. My needle was hitting the metal casing for the bobbin. I changed needles thinking it was bent, but that did not resolve the problem. I also ...

Singer Quantum XL 6000? The needle is too far to the left and often runs into the foot. I can no longer use a walking foot due to this problem. The needle just runs directly into the walking foot now.

I have problems with not be able to pick up the thread from the bobbin to start sewing Make sure the needle is not bent and is installed with the flat side of the needle shaft to the back of the ...

singer 211 and I am having a problem with the stitches the bottom walking plate will run forward for three stitches and then run backward for three stitches Sounds to me like you want to have straight

...SINGER EVEN FEED FOOT IT FITS BUT DOES NOT GO DOWN FAR ENOUGH MAYBE NOT LONG ENOUGH WHAT ELSE DO I NEED Triple check that you have the correct Even Feed Foot for your machine; they are made for ...

...SINGER sewing machine. Always be sure you are using the correct bobbin for your machine. Class 66, Class 15 and Class 15J bobbins look very similar. However, using the incorrect bobbin class in your ...

...walking foot and feed dogs up, that is when the e1 started. Machine is 3 yrs old, no problems before. Tried any stitch with regular foot still does it. Contacted singer and they said it was bobbin ...

Singer 20 u33 machine . I'm trying to sew vinyl and the tension is not right . How do I adjust for sewing vinyl try a microtex needle, this may solve your problem assuming your tension is fine on ...