Questions & Answers for: printing is faded

...printing, but after that, the left side of the page was printed very light, faded. If I run the "Clean Drum", it will print a litter better, but still faded. What can I do to correct this problem? ...

Print starts fine then fades When printing, the ink starts coming out fine. By the second page (sometimes the first), the blacks fade to magenta and the other colors fade out as well. If I go to print

Faded text every few lines- Canon printer When I print documents, or any kind of text actually, there are faded lines in the text every couple of lines. I've run every cleaning available multiple ...

print quality: dark faded, but continuous print quality: dark faded, but continuous vertical streaks about 1 - 2" wide on right and left sides. Print is legible, even in faded areas. Open top cover ...

the text is printed 5 times and fades away but i only print it once. every 5 a 10 cm i see the text i printed before it comes back every time and every time it is more fade away than before. if i ...

...faded when printing black . Perform the following steps to reduce or eliminate faded or grainy lines: Print at a higher quality setting. Verify that the paper you are printing on will lay flat. Paper ...

My CP1515n colour laser is giving faded colours.The left side of the print is very faded whereas the rest of the print is slightly faded There are two reasons for faded prints. Firstly, faded print ...

...colour print much. Your toner cartridge may be the culprit. Take the cartridge out and shake sideways and up/down. Reinstall it and try again. If it's still printing faded side, replace the

Print is fading from receit Welcome to the real world. Fading receipt print is chronic. In this high-technology world, the only reason I can think of for using that fading, heat-produced print is to ...

yellow ink faded on one side of copy Ink News - How To Correct Faded Prints From Toner ... www.inkpal.com/ink.../tips-to-correct-faded-prints-from-toner-cartridges... Rating: 3 - ?12 votes Mar 30, ...