Question about Officejet Pro L7780 All-In-One InkJet Printer
printhead latch. Figure 4: Lift the printhead latch Before installing a printhead, shake the printhead up and down at least six times while the printhead is still in its packaging. Figure 5: Shake the
...printhead latch. See the illustration below. Figure 2: Open the printhead latch Remove each problem printhead by lifting the printhead handle and pulling up. See the illustration below. Figure 3: ...
...printhead latch. Figure 3: Lifting the printhead latch Lift the handle of a printhead and use it to pull the printhead out of its slot. Figure 4: Removing the old printhead Shake the new printhead at ...
Question about Prospect Pro205 Wireless All-In-One InkJet Printer
...printhead latch and remove the printhead > close the printhead latch, close the printer cover and confirm the error message goes away from the operator panel.Proceed with the firmware update. ...
Question about Prospect Pro205 Wireless All-In-One InkJet Printer
...printhead latch and remove the printhead > close the printhead latch, close the printer cover and confirm the error message goes away from the operator panel. Proceed with the firmware update. ...
Question about X5650 All-in-One InkJet Printer
...printhead latch and remove the printhead > close the printhead latch, close the printer cover and confirm the error message goes away from the operator panel.Proceed with the firmware update. ...
Question about Prevail Pro705 Wireless All-In-One InkJet Printer
printhead latch > remove the printhead > close the printhead latch.2. Visit the Lexmark website to download and install the Lexmark Pro700 Series Firmware Update.3. After the update is
...printhead latch and remove the printhead.- Close the printhead latch, close the printer cover, and confirm the error message goes away from op panel. 2. Proceed with the firmware update. Please ...
...printhead carriage. Move the print carriage latch down, and make sure the loops catch the hooks. Snap the latch into place, and close the print carriage access door. After the message to align the ...
Question about Ask2000 Thermal Photo Printer
...latch open. but printhead access latch is closed. There should be a small switch that depresses when the access latch is closed. Check the part that the latch presses on, it should move freely and be ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions
