Questions & Answers for: pontiac 1993 grand crank sensor

Question about 1993 Grand Prix

1 Answer

...grand prix 3.1l The crank sensor on the 3.1 is on the firewall side of the engine, about halfway up the block, Difficult to get to. They are VERY BRITTLE, so take your time prying it out. You have to ...

Ad

...grand prix. 3.1 motor car would stop while driving. would not start. let it set for 2 hrs and it would start and go. replaced crank sensor new coil packs,new ign module,neew fuel pump and filter. now ...

Ad

Question about 1993 Grand Prix

1 Answer

Car will not start, battery & starter OK, check engine light indicates a code 12 - what is the possible problem ? possible crankshaft sensor problem. have you checked to see if any spark while ...

Question about 1993 Grand Am

2 Answers

1993 grand am no spark this is a 2.3 quad4,car ran fine when i shut it off now it has no spark,ive changed the crank sencor,the coil pack,the ecm modual,the oil pressure sencor,and still no spark,it ...

...1993 Pontac grand Am Replaced crank sensor, ignition switch, repalce eng computer brain, rplaced gas trottle sensor. Replace ignition module. Engine computer is related only to the fuel injectors. ...

...1993 pontiac grand prix  If its a 3.1 or 3.4 it will be on backside of the motor(inbetween motor and firewall....in the engine block..near the front of motor....if its a 3.8, it will be on ...

Where is the Crank Sensor on a 93 Grand Prix front of the engine just to right of crankshaft pulley

...grand am will crank but not start. Is there any sensor that might be the problem? ck for spark,, spark tester,,or take a another spark plug take one wire off plug spark plug into it lay it on the ...

Question about 1993 Grand Am

1 Answer

1993 Grand Am 3.3 V6, motor turned off while driving, will turn over but won't crank. Gas fuel. Removed spark plug from each of the coil packs and none are getting spark. HELP!!! test the crank sensor

1993 Pontiac Grand Am. No fuel pump power and no fire from coil packs. What could be wrong? run the fault codes and check for cam/crank position sensor fault. Check for the fuel sensor activating the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...