feed the paper through there and press thee upward arrow. it should work. hope I helped...=) I find folding the paper back on itself so it is square gives the rollers more to grab. You can also "push"
...paper feed. You might also want to try unpluging the printer and trying to roll the paper feed buttons by hand and seeing if a piece of paper will feed through without catching anywhere. If it does ...
paper feed problem We usuall put paper that has been used on one side in the paper tray . The tray frequently pulls more than one sheet through at a time. This happens when we put pre-printed forms in
paper gets feed in, I usually use this trick to start a new roll of paper. First, tear off the end of the new roll so that there isn't any glue stuck on the paper. Then, fold the tip of the paper like
...feed the paper in that slot (rolling out from the bottom). Then turn the printer on, and hit the feed to advance the paper into the printer. If there is no slot on the back, you will see that the ...
Does the platen move or does the paper not advance? Check the paper release lever to make sure the feed wheels are snapped in place. If the platen does not move something in the paper feed motor area
Question about EL-1701C Calculator
...feed the paper in while advancing with the calculator advance control/button If you can see into the paper feed area, look for some old paper blocking the feed. This is what I found on an old one at ...
Question about EL-1701C Calculator
...paper and feed it through. I have changed the advanced setting of the printer to glossy paper and I've even changed the advanced setting to thick paper and nothing seems to work. I've also tried ...
...paper, with the feed coming forward and over the top of the calculator. Insert the paper (recommend cutting it flush) into the feed slot in the back. Then use the paper advance key to advance the ...
Question about SPL-P100 Printing Calculator
...paper feed roller, a misaligned paper feed mechanism, or a malfunctioning sensor that controls the paper advance timing. To troubleshoot this issue, you can try the following steps: Check the paper ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions