Questions & Answers for: oil change shavings

...oil change I found metal shavings on the oil drain plug. I rode for about 200 mile and looked at the drain plug again there was a few more metal shvings on the plug. Could this have come from the ...

oil. now i am being told i need to change fluid on diferential and metal shavings are coming off the cap. can this be possible? also they told me it should be serviced and changed every thousand miles

CHANGE OIL WHILE IT IS HOT! check oil to make sure no metal is in oil or heavy shavings, if shavings or metal is present you need new tranny,measure the amount of oil you take out put same amount back

...you put on your shaving cream or foam, use some shaving oil underneath and this will help the razor glide over the skin. And don't forget to use a good quality razor. Change the blade

shavings in oil Probably came from a main bearing. Nothing you can do except keep the oil changed, and keep an eye on it. Sometimes something will get caught up in one of the bearings just long enough

...oil and there was metal shavings (specks) on dip stick. What could it be, cant afford a mecachnic. metal flakes on the dip stick are not really an issue unless it has gotten to the crank sensor. That ...

...250 miles and re inspect, dipstick, sump plug, and oil, if significant shavings are found, change all mains and con-rod bearings, if hardly any or none, reuse oil and check after about 1000

...and dropped the transmission oil pan also changed the oil . reved up car to try to get it roll forward time for transmission rebuild they do not like no oil and metal shavings means big problem for ...

...shavings when oil was changed. transmission has been giving me a problem going ino 2 but its smooth just the noise changed oil Check the belt tensioner, they stick and get sand in them. If you had ...

...shavings in oil pan mercedes ML 350 Mechanic today told me he found metal shavings in the oil pan when changing the oil on a B service. He said it comes from inferior metal parts in the car - said I ...