...The negatives and the original prints are excellent. I suspect there is not enough light when scanning. Epson Perfection 3200 Photo scanner are you using the a transparency adapter on the
Question about Perfection V700 PHOTO Flatbed Scanner
...negative holder. The Epson Perfection V series scanners have a fixed focus point which only adjusts between two settings depending on whether you select the film holders (which raise the film off the ...
...negative scanner on top...? I keep getting an error message telling me that it is not loaded. The little Forward arrow button does nothing. I have checked that it is connected. The button under the ...
Question about Perfection 4180 Photo Flatbed Scanner
scanner is reading my 35mm slides as negative rather than positive, there is no place to make a change as it is Full Auto mode? scanner is reading my 35mm slides as negative rather than positive? ...
Question about Perfection 4180 Photo Flatbed Scanner
Epson Perfection 4180 won't scan my negatives When I start the twain driver of my scanner, the driver refuse changing the document stetting to 'film negatives'. Another strange thing is the backlight ...
...negative film on epson 3490 I just finished scanning many 110 film strips. You need to lay the strip along the inside edge of slot A and scan in normal preview mode. On the preview strip, put a ...
Question about PSC 1410 All-In-One InkJet Printer
...negative, whereas a photo will generally only display a cropped portion of the original. You are also scanning the original source image rather than the color corrected and tweaked version of it that ...
...photo negatives and change to colour prints. thanks. Blair A multi-purpose printer scanner cannot scan negatives or slides. You need a slide scanner or a flatbed scanner that is capable of scanning ...
...with scanner. for the negatives, you need a scanner that can handle them like these
Question about New Ps9700 3-in-1 Digital Photo / Negative Films / Slides
...image looks like a negative. I'm setting it to "film scanner" and pressing enter. Anything I'm missing? Your software should have a setting for "slides" and "negatives". It's set to the wrong
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions