Questions & Answers for: move pulley

Question about NAV5800A Top Load Washer

1 Answer

...move to allow slack) Ignore the moving pulley and the large pulley in the center. The third pulley is your pump. Try to turn it by hand, it should move freely. Presumably, it wont and will need to be ...

Ad

...pulley to see that they move freely. Grasp each pulley with both hands and attempt to move the pulleys in or out and side to side. You shouldn't be able to get any movement other than perfectly ...

Ad

Question about 2004 TrailBlazer

1 Answer

moving the pulley to make the belt slack. Some have a hole in it that accepts a 1/2 in. drive ratchet and you pull it to move the pulley. Others have a bolt head you put a wrench on to move the pulley

Question about 2004 TrailBlazer

1 Answer

...alternator pulley tried to let tension off by tension pulley could not get pulley to move Try the tension pulley in both directions. If it won't move you'll have to replace the tension(idler)

...take the belt off the bolt does move but not moving pulley any sugestions if this is same as opel corsa then turn the bolt to tighten it and the pulley moves up releasing teh tension its spring ...

Question about 1993 Tempo

1 Answer

The belt in my car is not moving. The pulley attached to the altenator is not moving ...is the engine running? If the belt is moving but the alternator pulley isn't, it's seized and the ...

Question about 2002 Montana

1 Answer

seized! remove belt and with hand move all pulleys except for the crank pulley! if your able to move all pulleys then u good! just change belt and tensioner pulley! let mme know what happens when done

Question about 2002 Montana

1 Answer

...pulley it does nothing. Any ideas please Disconnect the door so the belt and pulleys will run without a large weight to move. If they move ok, reattach the door and try again but help the door move ...

Question about 1999 Ram

1 Answer

dodge ram pulley The Pulley on the serpentine belt near the power steering unit needed to be moved according to a mechanic. They adjusted the pulley and 300 miles later; the belt shredded and the ...

...pulley foesnt move at all is it supposed to? I need to know what all the pulleys are called and where there at and how to remove them can anyone help me with this! The tensioner pulley moves back and ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...