Low Beams dont I have an 05 Wrangler and the high beams work, but the low beams dont. I have already chaged the bulbs (same thing happens), checked all fuses (they are good), and I think the wiring is
...first, but the high beams still work. If you want and need both low and high beams to work then replace the headlight bulbs with brand new ones and I garauntee that both low and high beams will ...
...low beams do. when the flasher is pulled high beems work. when flicked forward to high beam spot lights come on but stilll no high beams.?? high beam switch is faulty look at getting a new
I replaced the bulbs and check all fuses. Could it be the headlamp switch could be becauce if you dont have low beams and high beams do work once you replace them with new bulbs low beams should work
...low beams don't work, could this be a blown fuse, if so where is the fuse? if low beams and high beams dont work check the fuse.if only the low beam lights dont work.and bulbs good.i am looking at ...
...not the bulb, high beam and all other lights work. Make sure you use the right light because the high beams and low beams use different lights. I think the low beam is H4531 and the high is
golf low beam doesnt work but high beam does high works on both settings check fuse first, then, fit new bulbs,then, if that dont work, fit a new column switch arm.(high beams have a relay,low dont.)
...dont know why low beam is not working and yet there is voltage ,high beam is fine ,it common to both headlights Check for bad ground for low beam and bulb. Also, check that the high beam works ...
...low beams are perfect, and I think the groung wire is the reson the high beams dont work. How do I fix this? the high and low beam use the same ground wire, your problem may be the bulb or the handle ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
