...uneven. The top stitch will be good for a few stitches, and then the stitches will bunch up or be loose. I have checked the threading of the top and of the bobbin. I tried to go the blind hem
Question about Curvy 8770 Electronic Sewing Machine
My bobbin stitch is loose. I have tried adjusting tension and have changed the needle. A.To correct loose stitches, try the following: (1) Balance the thread tension. If the stitches are loose on top ...
loose. How do i fis this? I always adjust my overlocker stitch in several ways. I start test serging with the blade set right out to the right so that it "fills" the stitching. I'll set all the thread
...tight bottom all over the place Hi. Loose stitching underneath means you need to increase the upper tension. Try just a little at a time, using scrap fabric of similar weight to what you want to
Question about 14SH654
...stitching When the trouble started my presser foot became loose and caused my needle to hit the foot and the need broke. Putting in a new needle and rethreading it now it only stitches a few stitches ...
Question about Curvy 8770 Electronic Sewing Machine
...bottom stitch is too loose, sews about half an inch then beeps twice and stops stitching. do you have a manual?try a new needleadjust the top tension try rethreading the machine top & ...
Question about Curvy 8770 Electronic Sewing Machine
bottom stitch on the 833 stylist is loose. I had my sewing machine tuned up. Unfortunately I didn't check it right the way, and still have the same problem, bottom stitch is loose. try ...
Loose bottom stitches on Singer 1507 The top stitches seem ok, the bottom stitches at very loose. Adjusted the bobbin tension to high, no help. top tension must be adjusted to fix loose stitches of ...
Stitches My stitches are too loose. You can even see the stitches on the front of the material. I can't seem to be able to adjust and get them right by using the manual. Please help! if the ...
Question about 4830
...won't make stitches. It runs the thread across the fabric but isn't catching It will stitch a few loose stitches and then continues to feed but doesn't stitch the fabrica together Clean the bottom. ...
Usually answered in minutes!
760 Questions
564 Questions
372 Questions
252 Questions
263 Questions