too loose. Solution: replace the belt. You can try to clean the belt with something like alcohol or isopropanol but then the problem returns sooner or later
...will not stick to pad Use a quality adhesive backed sanding disk, and clean the pad area with isopropanol/alcohol. This should allow the adhesive disk to stick. I recommend 3M adhesive
Question about 6120 classic Cellular Phone
...it my mobile not opening and the mobile getting hot possibly damaged by liquid try to clean it with isopropanol and let it dry and ...
how to solve the network problem in nokia 3110 caused by water damaged. clean it very will with isopropanol let it dry for one day then reheat the network area
Question about DVR-110D DVD RW Dual Layer Burner
...the 2 chrome rails that the lazer moves along as it reads the disk.To clean the lazer use get some Isopropanol from your local chemist.Use a cotton bud NOT SOAKED with a small amount of Isopropanol ...
...i fix it?? IF ITS A DECK USED IN CLUB ITS PROBABLY STUCK WITH SPILT LIQUID.RUN A SMALL AMOUNT OF ISOPROPANOL OR SIMILAR DOWN EDGES OF BUTTONS TO LOOSEN ...
cpu fan is not working Replace the entire heatsink with the fan. Use isopropanol to clean the old contact grease. Carefully and evenly tighten all screws.
Question about PIXMA MP130 All-In-One InkJet Printer
My Canon Pixma MP130 is printing with invisible lines through sentences and some sentences fainter than the ones above. Please advise. I have run both simple and deep cleaning actions and also changed
Question about PIXMA MP130 All-In-One InkJet Printer
...of salt mixed with isopropyl alcohol react wtih aluminum Common salt is not very soluble at all in isopropanol, being about 1/2800 that of water solubility. Hence you will have a suspension, really. ...
Question about PIXMA MP130 All-In-One InkJet Printer
...installed Try carefully clean the contacts in the printer. I would use cotton sticks with a little
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions