Questions & Answers for: installing new horn car

...installing a new eletrical 12volt horn in my I'm installing a new eletrical 12 volt horn, which i bought from harbor freigh, in my 1996 toyota corolla. The new horn does not work and now the old horn ...

Ad

...where do i start? ive replaced fuses, it's the horn 100% If your new horn will fit in the space where the old horn was, you can simply mount the new horn there and use the old wires for your new

Ad

...new horn , when I plug the wire on the horn it will start to blow until I remove the fuse. What is wrong? you may have a problem with the horn button on the steering wheel you might have to pull it ...

...making work all time. Just check entire wires, relay and horn button in your car for shorted and have them fixed. Otherwise you need to install new set of horn system ( horn button, wires and

Question about 1989 Cabriolet

1 Answer

...new horn: Install the new horn by screwing in the mounting bolts and plugging in the electrical connector. Reconnect the battery: After you have installed the new horn, reconnect the battery and test ...

Question about 1989 Cabriolet

1 Answer

new horn and mount it in the original location. However, if you are installing two horns, you will need to find a sturdy location with minimal vibrations. 4Splice the original pair of wires to the two

Question about 1989 Cabriolet

1 Answer

...new horn connectors and install the new horn on the mounting bracket. Install the mounting hardware. Tighten using the appropriate tool, either a wrench or screwdriver depending on the hardware and ...

Question about 1999 CR-V

1 Answer

a new alarm installed, but the problem persist. after market alarm? we could not begin to answer, how could we, it UNKNOWN system. but the horn is shorted, get a new horn or fix the shorted wire to it

...know what i can do? If the fuse blew, most likely the new one you installed also blew. Check it again. You have a short somewhere. Double check all the wires you did while installing the horn

Question about 2007 Mariner

1 Answer

new horn switch harness as necessary. INSTALL the driver air bag. REFER to Section 501-20B . TEST the system for normal operation. B3 CHECK THE CLOCKSPRING Key in OFF position. Disconnect: Clockspring

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...