Questions & Answers for: inside tire wear problem

inside tire wall? Since you put on new/larger rims I would say it is either improper tire inflation or your ball joints are either dying on you or they aren't setup right for that size tire/rim. Also,

...inside of the tread. someone said it might not be the cars alignment but the ball joints. what do you think is wrong with it? Sounds like its either your "camber angle" or your tires aren't balanced ...

front brake pads wear out fast, rotors wear fast. front right tire wears on the inside of the tire the wear on your tire is an alignment problem get them balanced and aligned.

...inside or outside of the tire which could mean your camber setting is off and alignment is needed. If you have uneven tire wear in one direction (place hand over tire thread and run it forward ...

...end needs to be realign, the wear your getting is call toe wear, mean tire's are pointing out, and will wear tire's on inside edge, have it realign and that will take care of your tire wear

...inside. was present during inspection and shown & told all bushings & everything else looked fine. It sound like the Camber is off in the rear. Did you have an alignment done after the new ...

...inside of tire is wearing and it makes a sqeaking noise The tire is wearing unevenly due to a tire defect...out of round, or belt seperation...the wear is also caused by alignment problems...get a ...

...tire wear is even after 5k miles. mine were wearing from inside to outside too. Comprehensive suspension and alignment inspection will give the real reason for tire wear front or rear. Front wheel ...

...wear on the inside on my 2006 passat wagon,i had the alignment done but after that tires kept wearing on the inside,today i put on new 18 wheels and after a test drive on the freeway i put my hand on ...

...inside no visible damage. shocks badly worn will this cause theses kinda problems This may explain it: http://www.bridgestonetire.com/tread-and-trend/drivers-ed/tire-tread-wear-causes // Incorrect/ ...