...HDMI port can go bad, but most of the time, connector is getting damaged, sometimes you can spot the damege by looking closely into the connector, see if any pins are bent or pushed in. If that's the ...
HDMI input is bad, the device output is not active, or if the cable is bad (or an adapter attached to the cable is bad). Adapters are likely failure points. If you are using a DVI to HDMI cable, check
...to fix the bad connection? Not the HDMI port,it the HDMI cable is dead.If u have dead HDMI port holding the HDMI cable wouldn't work,make no difference.Change the HDMI cable will solved ur
...bad HDMI cable. Just replace it. If HDMI still wont show, move to another HDMI port. But based on having to hold HDMI cable with hand to steady the connection, it is either a bad HDMI cable, or a bad ...
1. There is audio on hdmi 2. HDMI cord may be faulty. Try the cord that works on the port that doesn't If it works then the HDMI cord is bad. If it doesn't work then the HDMI port may be bad on the TV
Question about Tx-nr616 7.2 Thx Certified Network Receiver <<< Pre-order >>>
...DVD or other HD source instead of going through Onkyo. If it works, you have a bad HDMI output on the Onkyo. If not you may have a bad cable or a bad port on TV. Then try a different HDMI input on
Question about Tx-nr616 7.2 Thx Certified Network Receiver <<< Pre-order >>>
...and solutions Solving HDMI Problems Does HDMI cable quality actually affect transmission 1080 TV HDMI to HDMI connected to pc bad quality Expand your search lookin in google for por hdmi ...
Question about Tx-nr616 7.2 Thx Certified Network Receiver <<< Pre-order >>>
...hdmi ports are bad on your tv ( a cable guy said there was bad) Connect a good HDMI device to the HDMI port on your TV. Make sure the TV HDMI port is selected using your TV remote. Turn ON the HDMI ...
Question about Tx-nr616 7.2 Thx Certified Network Receiver <<< Pre-order >>>
...tv hdmi plug on tv it does not work first thing to try is replace the hdmi cable or try it on something else to see if it is bad, I once had the same problem and it turned out the hdmi cable was
Question about 50" 5400 Series LED HDTV - 50LN5400
...changes, or try new cables. you likely have a loose or slightly bad hdmi cable- this is the best case. worst case, a bad hdmi input jack on your tv, or bad hdmi output jack on your receiver/cable
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions
