Questions & Answers for: Technics grounding wire turntable

...turntable has the audio outputs + a black wire. Whats the balck wire for? I can only hear the lp when I hook up to my CD recorder and put it in the record mode. I can't adjust the volume. isnt the ...

...wire from the back of the cartridge to the outer shields of the RCA connectors. >or your neutral & hot wires of your house wiring might be reversed causing something weird. >a low quality preamp. (it ...

...turntable ground wire to? I'm working (as a DJ) with a 3-turntable setup, and my basic problem is that the ground wire is too short on my (Technics) turntables. Whichever turntable is furthest away ...

turntable and it came without the ground wire. Is there anywhere I can purchase this proprietary part? just get any small speaker wire and use that as your ground , attach that to the reciever you are

...to the GND. on the mixer or amp witch ever.failing that put a new ground wire in the turntable.when you take it apart you'll see the old one just crimp a new wire on to the old one,bob's you're ...

...grounding point, Unplug your receiver.. Split a wire and attach one of the splits to the receiver where you will see the text, "ground" or something similar. Attach the other end to something metal ...

where the needle goes. The turntable ground wire is attached to the turntable and the ground on the tuner/amp. Any ideas? Web search "hum on turntable with ground" for various techniques to analyze it

wire from the turntable to the red center wire of the RCA plug Green wire from the turntable to the outer wire with red wire of the RCA plug For left channel White wire from the turntable to the white

cannot connect ground wire on SL BD26 how does a wire attach to the back of the turn table? Usually, on Technics turntables, the ground wire is attached to a ground lug on the receiver.

...turntable should have a ground wire with one end stripped. Bend the stripped, bare wire into a u shape and hook it around the ground screw of your receiver and tighten it down. If your turntable is ...