...front wheel, loosen the allen screw on the bottom of the fork, unscrew the fork top, then remove the fork tube, and turn it over to drain(be careful internal parts of fork will come out)remove parts ...
...front wheel and axle and put a pie tin under the fork tube. Reach up into the bottom of the fork tube with a hex key and loosen the screw but do not remove. Now take the air pressure cross over tube ...
front First you want to clamp off the rubber line going to the caliper. You can put rubber hoses on needle nose vise grips and put them on the rubber hose. DO NOT put vise grips on rubber line without
the front shock needs oil. do I need to remove shocks ? yes, make sure to loosen fork caps before removing forks ,loosen top tripple clamp bolts first though
...front forks... 442.5-447.5cc.(14.99-15.16oz.) is the fork oil capacity for each leg. If your riding style is more on the aggressive side and do heavy braking, you can bump the air up a few pounds to ...
...front end dips more that it should? Change fork seals and cha he fork oil sounds like dirty fork oil or low on oil but do change oil and seals gx luck if u want a stiff front end can also use thicker ...
...front wheel alignment. You could have thrown a wheel balance weight or if you hit a pot hole, then the forks could have moved from straight and inline if the fork brace or triple tree worked a little ...
Question about 1994 VT 1100 C Shadow
...4. Chains---RATTLE 5. Clutches---CHATTER 6. Shifting Trans---CLUNK 7. Gears---WHINE 8. Front Forks---PLUNK 9. Rear Shocks---SQUEAK 10. Starters---CLICK 11. Solid Lifters---TICK 12. ...
Usually answered in minutes!
129 Questions
65 Questions
50 Questions
47 Questions
33 Questions