...foot pedal Does the Lanier VW 210 use a 15 pin or 7 pin connecter for the foot pedal? Where the foot pedal plugs in has a 7 pin connection, then a space and then an 8 pin connection. I bought this ...
...foot pedal on my Singer Inspiration is stuck on fast speed. Hi lawoffice474... Unplug your foot pad from the machine and the electrical receptical. Try moving the foot pedal with your hands, back and ...
foot pedal doesn't work foot pedal doesn't work well if the foot pedal isn't working, you can either replace it with a new one or take the machine to a sewing machine repair shop
foot pedal not working My machine is working but the foot pedal seems dead. When I turn the machine off and on again I heard a sound indicating the machine kicked in and I was stitching just before it
Question about Tiptronic 2040
...foot pedal is sticking and not fully extending to the off position, or the foot pedal has failed, or the problem is with control board inside the machine. As a test, hold the foot switch fully open ...
Question about Tiptronic 2040
foot pedal that activates sewing machine without any pressure on pedal only option is to unplug cord from pedal. Used another foot pedal, machine operated normally. If the 290 foot pedal is fairly new
...foot pedal does not work? Question edited for clarity. Add maker, 'Brilliance' not 'Brilliant'. Information on checking the foot pedal, but the last article said it was the main control board on this ...
Question about Tiptronic 2040
...sure your foot peddle is fully pluged in. It's a foot pedal error code. Try unpluging your foot pedal and start the machine if it works without the foot pedal have the foot pedal repaired or
Question about Tiptronic 2040
...foot pedal on my Bissell 3760-4 Replacing the upright locking foot pedal on a Bissell 3760-4 is a fairly straightforward process. Here are the steps you can follow: Turn off and unplug the vacuum ...
...foot pedal back on a Seno How do I put the foot pedal back on a Seno sewing machine?To put the foot pedal back on a Seno sewing machine, you will need to locate the pedal port on the machine. This is ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions