Questions & Answers for: how to fit bobbin case

...bobbin case did not fit. i have no idea how old this machine is or were to get a bobbin case that fits 541678 is the bobbin case you want.Most sewing machine dealers can get this part for you. The ...

...fit in tight enough so that when sewing, it slips down at an angle and then the bobbin thread doesn't feed right. Why would it do this and what should or can I do? The black bobbin case that the ...

...bobbin case (holder), the bobbin case is what you take out to put a new bobbin in. The bobbin case fits into the hook (it has a spindle in the center) which you do not take out of the machine unless ...

...fit. Is it the bobbin or the bobbin case that is banging around? If I don't seat my bobbin case properly, it rattles and eventually falls out. Your bobbin case may be damaged, in which case, the ...

...bobbin casing. Now I cannot get the casing to fit back ptoperly so it can be locked in place by the little latch which should move from right to left towards the bobbin casing. Can you help? Doug ...

...is not warped or damagedalso make sure the bobbin fits securely in the bobbin casedoes the bobbin case fit securely in the machine?the bobbin case could be getting old & might need to be

...therefor not fitted correctly. You can also run the machine whilst the bobbin is out and listen if there is any noise or anything shaking. Refit everything taking care that the parts fit

...fit the hook, then the retainer and lock it into position. Put bobbin into case pull thread under spring. Lift tab on case and put it over the hook's central pin and release tab. It should now be ...

...bobbin case does not fit my machine. Here is a selection: Sewing Machine Parts Singer Parts Singer 400 The Sewing Outlet I buy mine ...

...make and model. the metal bobbin fits in a metal bobbin case that sits under the small sliding trap door left of needle the bobbin case has an ear that points UP and must fit into the slot for ...