Questions & Answers for: exhaust hook up

...hook to metal lines that go down to the exhaust. Unhook one of these hoses at the sensor then hook up the vacuum/pressure guage. It should read less than 1 psi at idle and 3 to 4 psi at wide open ...

Ad

...exhaust pipe in VW Golf Mk V 2006 bought last week and now find it has no owners manual You need a code scanner hooked up to it to find out why that light is on. If you have an autozone near you,go ...

Ad

Question about L2310 GUV Central System Vacuum

1 Answer

...pick-up tube or out of the exhaust tube on the unit? I am assuming the pick-up tube. The installer has hooked your system up to the exhaust tube on the unit. Hook up to the intake on the unit

...exhaust hoses hook up to the air cleaner housing and pipe and the water hoses hook to the firewall a pipe on the back of the block and a short pipe hooked to the water pump. Repair manuels have ...

exhaust and intake which is which on the cylinder heads on a 1984 bronco 2 2.8L? Valves always line up with the port that determines its use. Intake will line up with the runners on the intake ...

I need help figuring out how to repair the exhaust, where the manafold hooks to the exhaust pipe What is wrong, the exhaust have a hole in it? Or is the bolts loose? I need to know exactly what you ...

Question about 2000 Impala

1 Answer

...hook into your exhaust. The one in the back is your low bank and the one near the front is your high bank sensor. Get under the car, at the front, and you should be able to see them hooking into the ...

Question about 1991 Cutlass Supreme

2 Answers

hook up on the exhaust. They should have four wires, maybe three. The other ends of them have connectors that hook into other electrical hook ups. The Oxygen Sensor will be located in the exhaust pipe

...start. There is a apart and all the lines are still hooked up and clear. When I take the exhaust off, it starts and runs but with it on it won't run. Any help would be appreciated ...

2001 Monte Carlo 3.8 Oxygen sensor location Oxygen sensor cause of P410 ? Look on the exhaust pipe ahead of the catalytic converter you will see it there also where the exhaust hooks to the exhaust ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...