Questions & Answers for: Land Rover Range Rover enter code

codes was attempted to many times, you can reset the radio by disconnecting the battery for 30 seconds and the radio will reset it self for you to re-enter the radio code. Good luck and keep me posted

...with key code in drivers door . help please key code lock out usually happens when you have entered the wrong code too many times leaving the battery connected should allow the timer to run ...

...enter key code going out of my mind can any one help.......... The BECM will retain the EKA code, so , charge or replace the battery. Close all doors, windows bonnet etc, then try the EKA code. You ...

...enter a radio code, but i do have the code if the instructions arent in your manual, check with your dealer, they will probably walk you thru it without charge to get you to come back....but with a ...

...You need to go to Rover dealer, provide your VIN# and they'll get it for you. Slot of times they'll enter it for you. TIP: when you get code, write it down in glovebox or center console box w/a ...

...enter code. require code you will need the vehicle code from dealer and you put the key in the drivers door lock and then enter the code by turning the lock so many times to the left and then the the ...

after changing the battery of range rover 2000 radio asked for code, we entered the code many times but did not accepet although the code has 0 and no zero on buttens and now the screen displays WAIT.

entering radio code how do I enter the radio code in to p38 range rover, have input number but don't know what else I need to do Use the station buttons.

...enter radio code, but not sure what to press for it to accept the code. The display just sits there with the code. When the fourth digit of the code is correctly entered the radio unlocks ...

...need to enter the theft deterrent unique security code for your VIN and radio serial number given to you at he time of purchase of the new vehicle. If you require the radio code then follow this