Questions & Answers for: egr value

...EGR value needs to be replaced (check engine light is on). Where is the value located and should I try to remove it and clean it? Is there any other items suspect for replacement with the fault code ...

Ad

EGR VALUE HOW TO REPLACE ON 1998 MONTE CARLO W3100 ENGINE ? EGR VALUE there is 2 10 mm bolts and a wiring harness to unplug right beside the intake . make sure the gaskets are in good shape

Ad

Question about 2008 Silverado 3500HD 2WD

1 Answer

value will decrease by approximately 3 kPa for every 305 meters (1,000 feet) of altitude. * A high resistance on the ground circuit of the MAP sensor can cause this DTC to set. * Any loss of vacuum to

...EGR valve closed, a closed valve position value is learned. If the PCM commands the valve closed and the actual feedback value does not match the learned values, DTC P1404 will set. Conditions for ...

...EGR value 1996 Chrysler LHS Where on the engine is the EGR value for a 1996 Chrysler LHS EGR valve for a 1996 Chrysler LHS Passenger side near the firewall. Look for a piece of plastic clipped to a ...

...egr value twice but check engine light keeps coming on saying its the egr value? Will not or hard to start check engine light keeps coming on ..has read egr value and replaced it twice but still says ...

pintle sensor location 1998 buick park ave remove egr value replace pintle sensor with egr value 1998 buick park ave i took my car to NA Auto Repair they did a great job at very resonable rates

Follow the EGR tube from the EGR vlave. You should see two rubber hoses attached. At the other end of those hoses is the DPFE sensor. Typically you would read the value of the sensor with a scan tool

...egr value on a 1993 gmc Sierra still doing the same thing any suggestions Check that the EGR vacuum solenoid is working. Remove the vacuum line to the EGR and there should be no vacuum in that line ...

EGR Value connection I have a Daewoo Lanos SX 1.6. I noticed that the pipe from the EGR value was lying loose. I know that it's needs to be connected to the intake manifold, but can't find the spot. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...