...and everything else but i cant find anything. Can anyone help? You have a dimmer switch for those lights. That would be the next thing to check. Try operating the switch to see if anything
Question about Pass and Seymour Decorator Fan Speed Control with Dimmer, White #LSDC16PWV
...dimmer for lights will not work on both fan and light. To wire the light: -You have identified black common wire for light (it is connected to dark-colored screw on 3-way switch) -You have identified ...
Question about 10 Eagle Almond Commercial Double Pole Light Switches
...light fixture and there is a dimmer switch that controls it. I removed the light fixture and installed a ceiling fan but the fan barely moves and the light bulbs barely come on. I think it may be the ...
...switch >> cap it off with wire nut Dimmer orange wire connects to ballast Dimmed Hot Dimmer red wire connects to ballast Hot Dimmer white wire connects to ballast Neutral Those are your wires ...
Question about Maestro 600-Watt Multi-location Dimmer Terracotta #MSC-600M-TC
...the light fixture continuously. What to do? The dimmer is worn out Wall switches and dimmers don't come apart for repairs >> nobody sells parts >> and the wiring didn't suddenly go
switch that has two wires, and your dimmer has two screws > then Connect these wires to either screw. 2) If you are replacing a switch that has two wires, and your dimmer has three screws > then
Question about Lutron Dimmer 600 Watts Ma-600-wh
dimmer light output is not the same as when i hook it up to a regular switch 1) Overview of product indicates it dims by electronics (they say saves 15% electricity) The electronics might be bad http:
...dimmer+%26+switch I cannot find a specific troubleshoot manual for Lutron dimmers So I suggest 4 things: 1) Feel the dimmer switch for heat >>> if it is getting hot (not warm), then that ...
Question about #R600PLAV 600W Almond SP Rotating Dimmer
...switch. If dimmer has black and red wires, > dimmer-black connects to Hot from breaker > dimmer red connects to Load > green (if available) goes to bare copper wire Recommendation: If you do ...
...dimmer switch. The parking lights, turn and hazard signals, the dashboard lights, rear lights all work perfectly fine when I turn my lights on and everything on the multifunction switch works. The ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions