Questions & Answers for: Oldsmobile Alero crank pulley

...rings if any avalable are replaced as well. then reinstall starter and oil filter and start car 2 types crank sensors 7x and the 24x the 7x remove oil filter the 24x you remove crank shaft

...starting at times. Does anyone know where to go from here? ignition coil pack it intermitten. also check the crank sensor and the main crank pulley, this is where the engine gets its firing orders ...

My belts wont turn when I crank the engine the battery light came on what can it be check to see if crankshaft pulley is turning. If not, broken crank maybe.

where is the crank shaft sensor located on my 2000 alero? CRANK SHAFT SENSOR FOR A 2.4 ENGINE NEXT TO OIL FILTER.FOR THE 3.1 - 3.4 ENGINES CRANK SHAFT SENSOR LOCATED BEHIND CRANKSHAFT PULLEY.

sensor located on my 2000 Where is the crank shaft sensor located on my 2000 alero? ABOVE THE OIL FILTER ON THE 2.4 ENGINE AND THE 3.1 AND 3.4 ENGINE CRANKSHAFT SENSOR LOCATED BEHIND CRANKSHAFT PULLEY

crank shaft sensor located on a 2001 oldsmobile alero on the 3.4 liter engine, it's behind the harmonic balancer--you have to remove the crankshaft pulley/balancer to see it. if you have the 2.4 liter

...all around the crank pulley, and see no wires or anything that looks like the unit. THE 2.4L ENGINE CRANKSHAFT POSITION SENSOR LOCATED JUST ABOVE THE OIL FILTER.REMOVE OIL FILTER YOU WILL SEE

crank is loose. If you find the pulley loose, if the bolt holes are not elongated, just tighten it back up. If the damper is loose, remove it from the engine (puller usually necessary) and inspect the

...crank at the bolt that holds the pulley on. Just remember tyhat when you go to put it together , that you only want to install the bolts hand tight at first then crank them down after you have all ...

...crank sensor .....easy .....getting it off .....not easy think its behind the harmonic balancer pulley ...the big one...but careful you will need a special tool to remove but do not pry on it has a ...