in. At the top of the therm. housing, you'll see a bleeder valve. Start and run the car, make sure the surge tank is full, and crack the bleeder valve until you see a steady stream of coolant come out
...bleeder valve foe coolant system on 96 cant find bleeder valve for coolant system on 96 accord lx 2.2 engine dr_greg is incorect. The bleeder valve is on the thermastat housing near the intake ...
...coolant bleeder valve is on the top of ur cars coolant thermostatic valve housing where the return top radiator hose is attached/ check coolant level first top it up if less/ start the engine and let ...
Question about 2001 Intrepid
...coolant come out of top of bleeder valve on water housing on a dodge intrepid 2001 2.7 replaced water housing for the reason the capping wore out and now coolant is coming out the top of the bleeder ...
Question about 1999 Grand Marquis
...coolant drips from the bleeders. If bleeder valves are not provided, open radiator cap and fill with coolant. Start the engine for about 30 seconds, check coolant level and fill to level if
Question about 1999 Grand Marquis
...coolant nipple (bleeder valve) at the highest point of the cooling system. You will have to locate it. Start the car and let it warm up to temperature then open the bleeder valve. Air mixed with ...
...most it's either a 8 or 10 millimeter socket to brake it loose. And if your speaking of the bleeder valve for the coolant system it's located on top of the thermostat housing. Hope this helps you
Question about 2000 Malibu
...is purged of all air. All coolant bleeders are supposed to reside higher than the radiator/coolant filling area...the coolant should flow out of the bleeder valve before tightening the bleeder
Question about 2000 Malibu
...bleeder valve add or take coolant from the degas or coolant reservoir. Or is the nipple coming from the coolant reservoir a plug that does not allow any coolant to or from the reservoir? Bleeder ...
...coolant system, open the 'bleeder valve' then start engine. Let engine 'warm' to operating temperature. Add coolant/water to reservoir tank if needed as system 'bleeds'. As coolant 'bleeds', ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions