...brake, the signal light works normally. There is no similar problem with the right side signal lights when I apply the brakes. bad socket or bulb normally when you have something like you got wrong ...
...colorado, i installed a four way harness exactly how the directions say, but when i connect the trailor only the right and left turn signal and taillights work. No break lights. On the truck, are the ...
Colorado 2wd Brake Light Problems plz help!! I replaced the two fuses (rear park lamp & rear park lamp 2) neither looked blown, replaced them anyway, as well as the bulbs, still nothing, The brake
...Colorado trailer harness right turn not working All my turn/stop and tail lights work on the truck, however the trailer right turn does not. All other lights, left turn, brake, tail/parking work. I ...
brake lights are not working only tail lights are lit Check for power at wire that plugs into taillight assembly. If it's good, you need circuit boards or bulbs for taillight assembly. Circuit boards ...
Question about 2005 Colorado
...brake controller for a few years, just replaced the light bulbs and checked the fuses All back lights work, just no brake lights u got a shortage some were u r gonna he to wire them into the other ...
Question about 2006 Colorado
Chevrolet Colorado,only left front turn signal works,not even hazard are working. first check the brake light fuse it powers the rear bulbs. remove and verify that all bulbs are working. note the wire
brake lights come on then defo the switch. you could try removing the switch and clean with air line and pushing back and forth then simply plug back into wiring before completluy refitting and try it
...Colorado and my brake lights, all 3, aren’t working. I’ve replace the switch on the right side of brake pedal, the fuses and bulbs have been checked by auto parts store and are fine. Could it be the ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions