noise coming from underneath my robin reliant (whirring sound) my robin reliant is making a whirring sound underneath seems to be at the front,started as a scraping noise almost like you had got a ...
...thing put vehicle in gear with parking brakes applied(remember your noise if comming from front of car)and listed for the grinding. Seperate the splash shield from rotor with a dull flat screw
1984 plymouth reliant wont start when I turn the key the engine just ticks what might be the problem? Dirty Battery terminals perhaps clean with terminal clen tool and check battery with volt meter ...
...car makes a boom boom noise and shakes. The wheels on the front move if you shake them back and fourth. Is that my ball joints? It's worse than ball joints, it's CV joints. Constant Velocity joints. ...
...car makes these faults to come up and undermine the working of the engine. So to start off we need to check from the fuel tank. Check if the fuel contains impurities and specially water. If so this ...
Plymouth reliant 1988, idles fine, under pressure loses power and spits and sputters like it is not getting enough fuel, and have change the map sensor and also checked to make sure that all fuel is ...
Question about 1986 Reliant 4 Door
1986 plymouth reliant has fire but will not start. What can I do? We have replaced the timing belt, battery , alternator, spark plugs, spark plug wires, ignition coil, fuel filter. It will fire but ...
Question about 1987 Reliant
...i put it in drive and got a violent shaking and bang noises.. put it in park it stopped. took the car to the mechanic and got the cv axle replaced but now when the car gets put into drive and ...
Question about 1987 Reliant
I just replace the fuel pump,filter and carburator on my 1983 plymouth reliant.it will turn over and start but wont say started what could be the problem I just replace the fuel pump,filter and ...
Question about 1988 Reliant
I changed the rotor and cap on my 1988 plymouth reliant station wagon (2.5 liter). It started with poor exhilaration and now will turn over but won't start. If I remember correctly the wires must be ...
Usually answered in minutes!
77 Questions
54 Questions
41 Questions
29 Questions
21 Questions