...washing machins BOSCH clasixx 6 and in the digital display show error code F 21 I have a Bosch Classixx 6 1200 express washing machine showing error code F21 on the display, what is it? Motor F21 ...
Question about Classixx WFO 2866 Front Load Washer
washing machine? F21 relates to a motor or control board fault. However, it is also caused by spikes in the mains and can be spurious. To reset it. Turn the appliance knob to the off or reset position
bosch classixx 6 1400 machine stopped working during cycle f21 on display F21 relates to a motor or control board fault. However, it is also caused by spikes in the mains and can be spurious. To reset
...the program control panel and the motor drive- for mechanical jamming or failure of capacitor. please check this link for help on Bosch machines. ...
Question about Classixx WFO 2866 Front Load Washer
...Bosch and said to hold the start button for seven seconds to reset the machine, but I dosnt seem like any buttons are active. Have you unplugged it, then plugged it back in? Also, try holding the ...
bosch exxcel1400 express washing its flashing f21 could u give u give me some advice as to what the problem might be thanks It normally indicates a fault with the motor or the main control board. Turn
Bosch wae24363gb/05 F21 Fault DEAD? F21 fault came up. After some research the most likely problem was the carbon brushes. I took a punt and I ordered new ones. We used the reset code which worked, ...
Question about Classixx WFO 2866 Front Load Washer
...Bosch Washing Machine Fault Codes F16 - Door lock error F17 - Inlet valve error detected F18 - Drain error detected F23 - Anti flood device has been activated F34 - Door lock error F42 - Motor ...
Question about Classixx WFO 2866 Front Load Washer
what does F;21 mean on my bosch exxel 7 machine Bosch Washing Machine error code F21 .. Error message indicates a motor bushes replacement are required...or motor electrical fault.
...Bosch washing machine F21 (or E21) normally indicates a fault with the motor or the main control board. ... If the error code returns, you have a problem with the motor (most likely carbon brushes), ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions