Questions & Answers for: Intel boot code

p4sxq won't boot When I try to boot my system I am getting one long beep...I can't find a beep code for what that might be. Any ideas? this RAM problem

...code. I then took out the one in Channel B(0) and tried to boot with just the one stick in Channel A, got the beep codes. I then took the one out of Channel A and put a stick in Channel B(0) and it ...

...boot. Used pci diagnostic card. Code of A6. AMI post codes says it stopped at Enable Parity and NMI. What can I do? The code A6 indicates bad memory. If it is new take it back or replaced under ...

...code's. These codes (beeps) vary in description. Ex: 1 long & 2 short - repeating. If you remove you're memory you will force a beeping error. No desktop or notebook will function without the system ...

...message telling you CPU test failed , but does it BEEP at all ? if you have a Beep code then replace the CPU fan ( when CPU gets too hot it will either shut down or the PC will not boot up at all

...boot from cd, code 4....checked Ram and reseated. set bios to default, tried everything i could think of....help...windows xp pro os.nothing hooked up except keyboard and mouse. Ram and Power supply ...

My D865PERL will not boot past the first screen that provides the model number,version, amount of RAM, and other info. It recognizes the keyboard and mouse. At the bottom of the screen it offers the ...

boot up to check the system board? It's likely a bad keyboard- try using either an usb keyboard or another ps2 keyboard- if it works and boots normally with a different keyboard, the issue was the bad

code,PXE-2.5 (build 083) Please help Go into the BIOS or System Setup and make sure you have it set to boot from your Hard Drive first.  This might be trying to boot from a LAN.Turn your computer

...both the rams, disconnected hdd, floppy drive, dvd rom but still beeping repetedly and fails to boot . please help. I removed the cmos battery and inserted after a minute, once worked but now