Questions & Answers for: banana plug

made in the manual. It says to use the screw terminals for the 7.1 surround sound. I had rather use banana plugs, but it seems to read that the banana plugs are for a second set of speakers and I will

...banana plug (Deluxe Gold-plated Banana Plugs #2788204) via a 20 gauge solid hook up wire. No problem with the alligator clip, but how do I tie-in the wire to this type of banana plug? Thanks unscrew ...

...plug one and and two banana plugs the other end. (phono plug/socket has two connections and banana plugs just one) If you can provide the model numbers of the two bits of equipment I can check this ...

...banana plug then insert the banana plug in the speaker post.  If you serch in google with the name speaker banana plug then you will get picture of different types. You can buy this banana plugs ...

can i use banana plugs on a technics su-vx600? You should be able to use banana plugs.  You do not "need" to though.If you do use banana plugs, you need to make sure the knob is fully screwed ...

How do I attach banana plugs to my receiver's binding posts? I can't put the banana plugs through the center of the post's knob. There is nothing to receive it. if It can't be done, can I replace the ...

i have a yamaha receiver rx-v371 the speaker imput clamps on the back are broken. Can i use banana plugs? For the main speakers , Yes, you can use banana plugs. Theyre built for that. I hope that ...

...banana plugs, but there is an easier way to connect speakers there. Remove wires from bananas, clean wires from insulation about 5mm (3/8"), unscrew black and red handles of speaker connectors in the ...

...banana plug. I would use speaker wire and connect the speakers and on the back of the receiver. Refer to instructions page 20. You bought the plugs so who is to ...

...banana plug into a Yamaha Htr 5850 There are red plugs on the back for speaker connectors. How do I get the. banana plugs into them? To insert a banana plug into a Yamaha HTR-5850 receiver, follow ...