...want to know how to adjust my fuel air mixture Unfortunately, most fuel injection engines don't have an adjustable fuel/air mixture by the technician. The fuel/air mixture is controlled by a
...adjust the carb Hi Anonymous, on the right hand side of the carburator there is an idle adjusting screw with a spring behind it, turn screw clockwise to increase idle counter clockwise to decrease ...
adjust the air fuel mixture bolt 1/4 turn at a time and let the engine settle for about 10 seconds, clockwise for a leaner mixture and counterclockwise for a richer mixture you are seeking the highest
Question about 2002 FXDL Dyna Low Rider
...adjust ldle air mixture on 2002 dyna low rider Hi Anonymous, on the right hand side of the carburator there is an idle adjusting screw with a spring behind it, turn screw clockwise to increase idle ...
adjust air fuel mixture Hi, Anonymous the carburetor throttle shaft wheel has two cables the cable closest to the right side of the bike is the throttle cable and the one closest to the left side is ...
Question about 2002 FXDL Dyna Low Rider
adjust air/fuel mixture of bajaj pulsor 220cc i need to adjust air/fuel mixture of bajaj pulsor 220cc WHY DO YOU NEED TO ADJUST THE AIR FUEL RATIO. HAS IT BEEN PLAYED WITH IF SO IT SHOULD BE ABOUT 1.5
adjust air fuel mixture Hi Wentzpatrick, on the right hand side of the carburator there is an idle adjusting screw with a spring behind it, turn screw clockwise to increase idle counter clockwise to ...
...adjust the CO and fuel/air mixture There is a adjusting screw. Which direction is rich clockwise or lean fuel/air mixture? the CO and fuel/air mixture is not adjustable on modern cars , only on ...
Question about 2000 Nubira
...adjust the air fuel mixture on 98 evinrude 15hp outboard On the 1998 Evinrude 15hp outboard, the air/fuel mixture is controlled by the carburetor. The carburetor is preset at the factory to provide ...
...adjust the air/fuel mixture, you'll need to locate the carburetor and look for a small screw that can be turned. Keep in mind that the exact location of the screw may vary slightly depending on the ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions