Questions & Answers for: position stove switch

...position on my GE JGP328 cook top It's the Switch Harness. Do not remove the stove and disconnect it from the gas. Turn the gas off under the stove. Take off the: knobs and the plate; burners; hxw ...

...position. It was early morning, stove had not been used for about 12 hours. After a cold breakfast, noticed hot stove light was on, then saw red glow of left front burner. Turned switch on, then back ...

...stove... heard a funny sound and then the burner I was not using suddenly started heating up with the switch still in of position. It appears that the problem is the burner switch. I've bought a new ...

...stove. The noise ranges, it isn't just a constant....kind of like it is fading then back really loud. The burners and oven still work, but am worried to keep it plugged in. Any ideas? Turn the ...

...stove is turned to the PILOT position. To turn it off, move the slide switch to the OFF Position and the burners will go out and the pilot will remain burning. Good luck. Please let me know how it ...

position. I unplugged the stove so as not to kill ignitor altogether. Hi, Here is a tip that I wrote that will help figure out why the burner spark keepson clicking... Gas Range Repair Burners Keep on

...stove's Control Valve. Is it in the ON position or the Pilot position. If it's in the Pilot position, turn it to ON. If that's not the case, check the wiring from the the thermostat where it connects ...

position and see which one has a circuit (continuity) when off..when you figure which one has continuity when off that will be the one that is causing the stove to spark when off. Be sure to check all

...has failed in the full on position. I would start by replacing the switch or you might just swap it with another working switch on the stove and see if it does the same thing or if it works

...stove is that the "ignition electrode," which sparks to the front right burner, seems loose in its position, but it's always been that way, and I'm still seeing spark on it and all the other burners. ...