Questions & Answers for: 2nd gear wont engage

...2nd gear the gear stick wont even go over to where the gears should be....... any ideas? Hi, maybe has a broken linkage or the bolt came lose. Check if you can engage hall the gears pushing the ...

...2nd gear grinds 1985 yamaha xj700x. put into 2nd gear keeps clicking. Normally the problem would be a bent shift fork and that may indeed be the problem. The shift fork is a part of the gearbox and ...

...2nd, it sometimes jambs and wont select second. It always engages on the second attempt. I brought this to the attention of a Suski dealer when under warranty and another machanic but with no ...

...gear problems 1st,2nd,4th an 5th gears are super but third gear isn't happening it just wont engage right , its very jumpy and has a serious lack of power . itseems like it is skipping . has any one ...

When I change to 3rd it wont drive even to 4th. Drives in 1st and 2nd either the selectors for those gears isnt moving or teeth are broken on the gears,or the splines engaging the gears to the shafts

...2nd and 3rd gear Shift forks are bent or shift rod is bent. Bent forks or arm won't allow the tranny gears to slide into position. Must be taken apart, to correctly diagnois, When you shift with your ...

...OMG this is expensive 2nd gear alert... https://r1videos.files.wordpress.com/2011/04/2002-2003-yamaha-r1-service-manual.pdf OEM parts for Yamaha ...

...2nd gear, just replaced both motors and problem still exists. Any help? Gator works fine in 1st and Reverse. 2nd gear only right wheel is working. Replaced both motors to no luck. Any suggestions ...

...gear works fine but 3rd Bent shift fork is your problem.1st and 2nd working fine,wont go into 3rd,replace the shift fork and stop being so hard on the shifter.Costs a lot of money to fix these

...clutch bike still wont engage 2nd or move up the gears when running Did you adjust tension on the cable correctly? If all is installed correctly, then you have to check the gears - they may be