Questions & Answers for: Mazda 27 lb

i need to replace the alternator on my sisters car and its not here right now and was wondering where the alternator is located so i will know if ill be able to get to it to fix it if you have the 2.3

...27 to 36 foot lb. (37 to 49 Nm) if you have a Mazda6 or to 16 to 23 foot lb. (21 to 31 Nm) if you have a Mazdaspeed6. Step 4 Replace the tire wheel assembly. Lower the car to the ground. Step 5 Add ...

i need torque specs for the head on a 93 mazda b2200 2.2l 4 cylynder First Step: 20 lb/ft Sec Step: 40 lb/ft 3rd Step: 59-64 lb/ft

timing belt markings mazda B2500 1998 Timing Belt, Sprockets & Front CoverRemoval & InstallationTiming beltTo Remove: Disconnect the negative battery cable. Remove the exhaust side spark plugs

...27 to 36 foot lb. (37 to 49 Nm) if you have a Mazda6 or to 16 to 23 foot lb. (21 to 31 Nm) if you have a Mazdaspeed6. Step 4 Replace the tire wheel assembly. Lower the car to the ground. Step 5 Add ...

torque sequence for intake plenum acording to autodata it is 22in lb

...53 N.m 3.7-5.4 m-kg, 27-39 ft-lb) 3. Align the marks, and install the front propeller shaft. Tightening torque: 49-59 N.m (5.0-6.0 m-kg, 36-43 ft-lb) Thank you for using FixYa.com Regards, Lee ...

TORQUE SETTING FOR FLYWHEEL BOLTS AND PRESSURE PLATE WL ENGINE 2007 MODEL Hello and Welcome to FixYa.com 84.8 ft.lb. Thank you for using FixYa.com Regards, Lee Davidian Your FixYa Expert

What is e tension for the hub nut - Mazda Atsina 323 2002 model. Hub nut as in the axle stake nut that retains the CV drive axle? 165 lb/ft. Lug nut 80 lb/ft

mazda demio zj engine torque settings Here are some common torque settings for the Mazda Demio with the ZJ engine: Cylinder head bolts - 35-40 Nm (26-30 lb-ft) Main bearing bolts - 54-61 Nm (40-45 ...