Questions & Answers for: 27 lb

Ad

27 N.m 20 lb ft A/C Compressor Mounting Bracket Bolts 50 N.m 37 lb ft Air Filter Housing Bolts 12 N.m 106 lb in Alternator Adjusting Bolt 20 N.m 15 lb ft Alternator Adjusting Bracket Retaining Bolt 20

Ad

Question about 1994 F150 Styleside Supercab

2 Answers

27 5414 Front Spring Insulator 28 18183 Front Shock Absorber Mounting Bracket 29 34992 Nut 30 5310 Front Coil Spring 31 5B315 Upper Spring Seat 32 18198 Insulator A ? Tighten to 34-48 Nm (25-35 Lb-Ft)

Ad

Question about 1996 Grand Marquis

1 Answer

...27 Nm (15-20 lb-ft). Tighten the lower and middle bolts to 20-27 Nm (15-20 lb-ft). Connect starter solenoid connector. Be careful to push straight on and make sure connector locks in position with a ...

Question about 2006 Freestar

2 Answers

...the washer hose. Install the pushpins. Install the windshield arms and nuts. Tighten to 27 Nm (20 lb-ft). Cycle and park the windshield wipers to check for correct alignment. alot are under the ...

...27-38 ft lb. Torque upper bolt to 8-10 ft lb. Torque crossmember bolts to 69-96 ft lb. Read more: ...

Question about 1985 ZL 900 A1 Eliminator

2 Answers

...27 ft\lb 10mm new bolts 29 ft\lb there was a 11mm head bolt option on some models with a protruding head 35ft\lb used 38ft\lb new on TDC line the exhaust cam mark EX with the gasket surface. then ...

Question about 2001 F250 Super Duty Super Cab

1 Answer

27-32 lb/ft). Rotate fasteners 1 through 10, 85-95 degrees. Stage 2: Tighten the cross-mounted fasteners 11 through 20 to 27-33 Nm (20-24 lb/ft). Rotate fasteners 11 through 20, 85-95 degrees. Tighten

Question about Electric WCVH6800J Front Load Washer

2 Answers

I would like the size dimensions of the GE front loader Here you go: Overall Depth (in.):31 1/4 Overall Height (in.):41 1/2 Overall Width (in.):27 Approximate Shipping Weight (lb.):225 42 x 27 x 30

Question about Electric WCVH6800J Front Load Washer

1 Answer

...27-33 Nm (20-24 Lb-Ft) Rotate 85-95 degrees Rotate an additional 85-95 degrees. Tighten in two steps: 20-30 Nm (15-22 Lb-Ft) 26-32 Nm (20-23 Lb-Ft) Advance 3/4 to 1 turn after gasket contacts sealing ...

...mounting bolt: 27-38 Lb-ft (37- 52 N.m. 3.8 -5.3 kg-m) Adjusting bolt: 14 - 18 Lb-ft (19 -26 N.m. 1.9 -2.6 kg-m) Image 6. Install AC and P'S drive belt, if equipped. and adjust

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

john h

Level 3 Expert

22486 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...