Hi Gooday! Im a Panasonic pabx technician...i had a problem with our current project pabx system the CO card or trunkCard always hung and all line always busy...whst is the posible problem of my pabx?

http://service.us.panasonic.com/OPERMANPDF/KXT7720.PDF

or

http://www.ehow.co.uk/how_7159736_program-panasonic-kx-t7730.html

Try the parts department for your device at Panasonic . Com. support and parts.

Look carefully at the part number on the phone and where you posted. A Panasonic 7730 set has 24 buttons, 12 left side C.O. buttons and 12 right side PF buttons. A TA30830 (new style) has 12 buttons with LED's. In our country, the TA30830 needed 824 version 2 or greater software to work.
In your country the other mate to that is the KXT-7667.

If your phone is one of those and actually works, as in any Panasonic set, the LED buttoon requires a "2" in front of the digit sequence to tell the system it's a PF button.. So, PROG button 2+access code+number STORE saves a speed dial. The access code is what you dial to get an outside line.

Carl

It initializes in 808. Try looking in the installation manual for the complete programming references.

Carl

First the button clear position
anfter press hold reset 20sec

it will reset
after turn off PABX
move the button to open position

and strat the PABX



Please let me know this is helpful

KX-TDA100 Maintenance console found at www.wanetelecoms.com
KX-TDA200 Maintenance console found at www.wanetelecoms.com
KX-TDA50G Maintenance console found at www.wanetelecoms.com
Panasonic Unified Maintenance console Version 7.3 found at www.wanetelecoms.com

You are asking for some very advanced setup features, as far as connecting them you need the IPGateway cards. They are cat5 cards that will do the trick. However programming the setup to do what you want will be VERY time consuming and not to easy to walk someone through. On-site tech is highly recommended for that much programming and work.

Hi Rone... Very urgently i need programing manual for EPABX Ericsson BP 250, can u help me pleeeeez.

CO Not Assigned

If you do not remember your code, LOCK will unlock in
12, 24, or 48 hours, depending on the current set-up. Be
cautious when selecting ALWAYS. If ALWAYS is
selected and you forget your secret code, the TV must
be serviced by a qualified technician to clear the LOCK
set-up.
• If you select CHANGE CODE, and you change your
code from the one used in the LOCK menu, your new
code becomes the controlling code.